SKS - 110, 116 & 120

Home » Products » Valve » SKS - 110, 116 & 120

"SKS 110" (PN -10 Rated) "SKS116"-(PN - 16 Rated)
CI Butterfly Valve Ductile iron (Electro- less Nickel Plated) Disc, Single Piece C.S through Shaft phenolic Backed Replaceable E.P.D.M. Sleeve. Maximum Temperature Rating :40^oC to + 120^oC, (-50^oC to +150^oC Intermittent).

"SKS 120" (PN -10 Rated)
CI Butterfly Valve, S.S.316(CF 8M Disc. Single Piece S.S.304 (CF 8) through shaft, Phenolic backed replaceable E.P.D.M. Sleeve. Maximum Temperature
Rating : 40^oC to +120^oC, (-50^oC to +150^oC Intermittent).

Design Criteria & Advantage :

Simple mounting/ easy Automation & retrofit Possible.

Long service life with little or nil maintenace.anti-blowout Spindle/ Suitable For high Vaccuum Conditions.

100% Bi- Directional tight shut off through Centric valve Disc & Shaft position.

Symmetric / streamliened valve disc & prifile, thereforelittle pressure loss.

Bushing Supported haft Bottonm for low torque requirement.

weather shaft & pressure Surge seals Eliminates all possible leakages.

Unique "Twin Advantage" Of Phenolic backing

Combination of (Internal Bonded/ Replaceable type) Rubber seat/ Sleeve

High liner Stretch/ stretch resistant/ non-Collapsible & Anti- Deformation.

Nil Saet Body Friction /Nil Corrosin of the body beneath the seat.

No need to Scrap the valve due to damaged sleeve - Easy field replacement.

Part Name	Details
Body	Cast Iron (Fine Graded Casting)
Disc	Ductile Iron (ENP) / S.S. 316 (CF 8M)
Stem	C.S. / S.S. 304 (CF 8)
Seat/ Sleeve	E.P.D.M.
Operator	Hand Lever
Flange Flating	ASA #150/ Table 'E' / AWWA
Top Flange	ISO 5211 - Drilling

Type	Water Type Sitable to ASA #150/ table 'E' & AWWA Standard flange.
Body	Cast iron (Fine Graded Castings).
	Options : Ductile iron/ Stainless Steel & Cast Steel.
Sleeve	Phenolic Backed replaceable type E.P.D.M. Sleeve.
	Options : Buna-N (-12^oC to +93^oC) / viton (-23^oC to +150^oC). Hypalon (+18^oC to 140^oC) / P.T.F.E (+10^oC to +150^oC).
Disc	Ductile iron (Electro-less Nickel Plated) / S.S. 316 (CF 8M) Disc.
	Option : S.S.304 (CF8) / SS.316 (CF 8M) / C.S. (WCD) & all Bronze.
Shaft	Single pieces C.S./ S.S.304 (CF 8) though Shaft.
Bush	Luberized Bushing fitted at (Shaft bottom/ Actuator Mounding & immediately at the outboard of the seat) to prevent shaft overload.
Lever	C.I. hand lever suited for the special key design on the shaft head to provide positive attachment to manual lever or the Actuator.
	Options : Worm Gear Box, Pneumatic & Electric Actuator.
Notch Plate	Chrome plated notch plate with 8 grading for throtting service.
Neck Flange	Integral body cast neck flange accommodates all type of Hand Levers, Gear & Pneumatic or Electric actuator.
Temperature
Rating	(-40^oC to +120^oC), (-50^oC to +150^oC Intermittent)
Pressure	PN-10 Rating. Shell Test : 15 Kg. Shell Test : 11 Kg.
Rating	PN-16 Rating. Shell Test : 24 Kg. Shell Test : 17Kg.

Size	K	J	L	ØD	n/ØD	ØK	ØD4	4/ØD1	C	ØD1	ØD2	ØF	S x S
DN 50	161	80	32	114	4/Ø18	65	50	7	43	52.50	12.60	12.10	9 x 9
DN 65	175	89	32	127	4/Ø18	65	50	7	46	68.80	12.60	12.10	9 x 9
DN 80	181	95	32	146	4/Ø18	65	50	7	46	78.30	12.60	12.10	9 x 9
DN 100	200	114	32	178	8/Ø18	90	70	9	52	103.80	15.77	14.10	11 x 11
DN 125	213	127	32	210	8/Ø18	90	70	9	56	123.10	18.92	18.10	14 x 14
DN 150	226	139	32	235	8/Ø18	90	70	9	56	155.00	18.92	18.10	14 x 14
DN 200	260	175	40	292	8/Ø18	125	102	11	60	202.10	22.10	22.20	17 x 17
DN 250	292	203	40	356	12/Ø18	125	102	11	68	250.10	28.45	28.20	22 x 22
DN 300	337	242	40	406	12/Ø18	125	102	11	78	301.10	31.60	28.20	22 x 22